
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
|
Elmer's Products, Inc. |
Emergency Phone Number: |
|
1 Easton Oval |
Poison Control Center |
|
Columbus, OH 43229 |
1-888-516-2502 |
For additional product information, access our website at www.elmers.com or
call 1-888-435-6377. To place an order, call 1-800-848-9400.
SUBSTANCE: ELMER'S CRAFT BOND PHOTO STICK
TRADE NAMES/SYNONYMS:
E819, E64819
PRODUCT USE: adhesives
CREATION DATE: Feb 02 2005
REVISION DATE: Sep 18 2010
2. COMPOSITION, INFORMATION ON INGREDIENTS
COMPONENT: NON-HAZARDOUS
SUBSTANCE
CAS NUMBER: Not assigned.
PERCENTAGE: 100
3. HAZARDS IDENTIFICATION
NFPA RATINGS (SCALE 0-4): HEALTH=1 FIRE=1 REACTIVITY=0
EMERGENCY OVERVIEW:
PHYSICAL FORM: waxy solid
MAJOR HEALTH HAZARDS: No significant target effects reported.
POTENTIAL HEALTH EFFECTS:
INHALATION:
SHORT TERM EXPOSURE: no information on significant adverse effects
LONG TERM EXPOSURE: no information on significant adverse effects
SKIN CONTACT:
SHORT TERM EXPOSURE: no information on significant adverse effects
LONG TERM EXPOSURE: no information on significant adverse effects
EYE CONTACT:
SHORT TERM EXPOSURE: no information on significant adverse effects
LONG TERM EXPOSURE: no information on significant adverse effects
INGESTION:
SHORT TERM EXPOSURE: no information on significant adverse effects
LONG TERM EXPOSURE: no information on significant adverse effects
4. FIRST AID MEASURES
INHALATION: If adverse
effects occur, remove to uncontaminated area. Give artificial respiration if
not breathing. Get immediate medical attention.
SKIN CONTACT: Wash skin with soap and water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical attention, if
needed. Thoroughly clean and dry contaminated clothing and shoes before reuse.
EYE CONTACT: Flush eyes with plenty of water for at least 15 minutes.
Then get immediate medical attention.
INGESTION: If a large amount is swallowed, get medical attention.
5. FIRE FIGHTING MEASURES
FIRE AND EXPLOSION HAZARDS:
Slight fire hazard.
EXTINGUISHING MEDIA: carbon dioxide, regular dry chemical, regular foam,
water
FIRE FIGHTING: Move container from fire area if it can be done without
risk. Avoid inhalation of material or combustion by-products. Stay upwind and
keep out of low areas.
HAZARDOUS COMBUSTION PRODUCTS:
Thermal decomposition products or combustion: oxides of carbon
6. ACCIDENTAL RELEASE MEASURES
OCCUPATIONAL RELEASE:
Collect spilled material in appropriate container for disposal. Keep out of
water supplies and sewers.
7. HANDLING AND STORAGE
STORAGE: Store and handle in accordance with all current regulations and standards. Keep separated from incompatible substances.
8. EXPOSURE CONTROLS, PERSONAL PROTECTION
EXPOSURE LIMITS:
ELMER'S CRAFT BOND PHOTO STIK:
No occupational exposure limits established.
VENTILATION: Based on available information, additional ventilation is
not required.
EYE PROTECTION: Eye protection not required under normal conditions.
CLOTHING: Protective clothing is not required under normal conditions.
GLOVES: Protective gloves are not required under normal conditions.
RESPIRATOR: Under conditions of frequent use or heavy exposure,
respiratory protection may be needed. Respiratory protection is ranked in order
from minimum to maximum. Consider warning properties before use.
Any chemical cartridge respirator with organic vapor cartridge(s) and dust and
mist filter(s).
Any chemical cartridge respirator with organic vapor cartridge(s) and
high-efficiency particulate filter(s).
Any air-purifying respirator with a full facepiece, an organic vapor canister
and a dust, mist, and fume filter.
Any powered, air-purifying respirator with a tight-fitting facepiece and a
high-efficiency particulate filter.
For Unknown Concentrations or Immediately Dangerous to Life or Health -
Any supplied-air respirator with full facepiece and operated in a
pressure-demand or other positive-pressure mode in combination with a separate
escape supply.
Any self-contained breathing apparatus with a full facepiece.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: solid
PHYSICAL FORM: waxy solid
ODOR: Not available
BOILING POINT: Not applicable
MELTING POINT: Not available
VAPOR PRESSURE: Not applicable
VAPOR DENSITY: Not applicable
SPECIFIC GRAVITY: Not available
WATER SOLUBILITY: Not available
PH: Not applicable
VOLATILITY: Not applicable
ODOR THRESHOLD: Not available
EVAPORATION RATE: Not applicable
COEFFICIENT OF WATER/OIL DISTRIBUTION: Not available
10. STABILITY AND REACTIVITY
REACTIVITY: Stable at
normal temperatures and pressure.
CONDITIONS TO AVOID: Avoid heat, flames, sparks and other sources of
ignition. Avoid contact with incompatible materials.
INCOMPATIBILITIES: oxidizing materials
HAZARDOUS DECOMPOSITION:
Thermal decomposition products or combustion: oxides of carbon
POLYMERIZATION: Will not polymerize.
11. TOXICOLOGICAL INFORMATION
Not available
12. ECOLOGICAL INFORMATION
Not available
13. DISPOSAL CONSIDERATIONS
Dispose in accordance with all applicable regulations.
14. TRANSPORT INFORMATION
U.S. DEPARTMENT OF
TRANSPORTATION: No classification assigned.
CANADIAN TRANSPORTATION OF DANGEROUS GOODS: No classification assigned.
15. REGULATORY INFORMATION
U.S. REGULATIONS:
CERCLA SECTIONS 102a/103 HAZARDOUS SUBSTANCES (40 CFR 302.4): Not
regulated.
SARA TITLE III SECTION 302 EXTREMELY HAZARDOUS SUBSTANCES (40 CFR 355.30):
Not regulated.
SARA TITLE III SECTION 304 EXTREMELY HAZARDOUS SUBSTANCES (40 CFR 355.40):
Not regulated.
SARA TITLE III SARA SECTIONS 311/312 HAZARDOUS CATEGORIES (40 CFR 370.21):
ACUTE: No
CHRONIC: No
FIRE: No
REACTIVE: No
SUDDEN RELEASE: No
SARA TITLE III SECTION 313 (40 CFR 372.65): Not regulated.
OSHA PROCESS SAFETY (29CFR1910.119): Not regulated.
STATE REGULATIONS:
California Proposition 65: Not regulated.
CANADIAN REGULATIONS:
WHMIS CLASSIFICATION: Not determined.
NATIONAL INVENTORY STATUS:
U.S. INVENTORY (TSCA): All the components of this substance are listed
on or are exempt from the inventory.
TSCA 12(b) EXPORT NOTIFICATION: Not listed.
CANADA INVENTORY (DSL/NDSL): Not determined.
16. OTHER INFORMATION
©Copyright 1984-2005 MDL Information Systems, Inc. All rights reserved.
SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE, except that the product shall conform to contracted specifications, and that the product does not infringe any valid United States or Canadian patent. No claim of any kind shall be greater in amount than the purchase price of the quantity of product in respect of which damages are claimed. In no event shall Seller be liable for incidental or consequential damages, whether Buyer's claim is based on contract, breach of warranty, negligence or otherwise.