
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
|
Elmer's Products, Inc. |
Emergency Phone Number: |
|
1 Easton Oval |
Poison Control Center |
|
Columbus, OH 43219 |
1-888-516-2502 |
For additional product information, access our website at www.elmers.com or
call 1-888-435-6377. To place an order, call 1-800-848-9400.
SUBSTANCE: ELMER’S WASHABLE CLEAR
SCHOOL GLUE
TRADE NAMES/SYNONYMS:
E305, E5001, 60305
PRODUCT USE: adhesives
CREATION DATE: Nov 27 2007
REVISION DATE: Aug 27 2009
2. COMPOSITION, INFORMATION ON INGREDIENTS
COMPONENT: NON-HAZARDOUS
SUBSTANCE
CAS NUMBER: Not assigned.
PERCENTAGE: 100
3. HAZARDS IDENTIFICATION
NFPA RATINGS (SCALE 0-4): HEALTH=1 FIRE=1 REACTIVITY=0
EMERGENCY OVERVIEW:
COLOR: various colors
PHYSICAL FORM: liquid
MAJOR HEALTH HAZARDS: No significant target effects reported.
POTENTIAL HEALTH EFFECTS:
INHALATION:
SHORT TERM EXPOSURE: no information on significant adverse effects
LONG TERM EXPOSURE: no information on significant adverse effects
SKIN CONTACT:
SHORT TERM EXPOSURE: no information on significant adverse effects
LONG TERM EXPOSURE: no information on significant adverse effects
EYE CONTACT:
SHORT TERM EXPOSURE: no information on significant adverse effects
LONG TERM EXPOSURE: no information on significant adverse effects
INGESTION:
SHORT TERM EXPOSURE: no information on significant adverse effects
LONG TERM EXPOSURE: no information on significant adverse effects
4. FIRST AID MEASURES
INHALATION: If adverse
effects occur, remove to uncontaminated area. Give artificial respiration if
not breathing. Get immediate medical attention.
SKIN CONTACT: If bonding occurs, immerse the bonded surfaces in warm
soapy water. Peel or roll the surfaces apart using a blunt edge, such as a
spatula or spoon handle. Do not pull surfaces apart with a direct opposing
action. If burns occur, treat as thermal burns. Get medical attention, if
needed.
EYE CONTACT: If bonding to tissues occurs, wash with large amounts of
warm water. Cover both eyes with sterile, dry bandages. The eye will open
without further action. Do not pull surfaces apart with a direct opposing
action. If burns occur, treat as thermal burns. Get medical attention.
INGESTION: If a large amount is swallowed, get medical attention.
NOTE TO PHYSICIAN: Mineral oil, vegetable oil, or petroleum jelly may
help soften the bonding between skin surfaces. For skin contact, consider
acetone or nitromethane.
5. FIRE FIGHTING MEASURES
FIRE AND EXPLOSION HAZARDS:
Slight fire hazard.
EXTINGUISHING MEDIA: carbon dioxide, regular dry chemical, regular foam,
water
FIRE FIGHTING: Move container from fire area if it can be done without
risk. Avoid inhalation of material or combustion by-products. Stay upwind and
keep out of low areas.
FLASH POINT: No data available.
6. ACCIDENTAL RELEASE MEASURES
OCCUPATIONAL RELEASE:
Stop leak if possible without personal risk. Small spills: Absorb with sand or
other non-combustible material. Collect spilled material in appropriate
container for disposal.
7. HANDLING AND STORAGE
STORAGE: Store and handle in accordance with all current regulations and standards. Keep separated from incompatible substances.
8. EXPOSURE CONTROLS, PERSONAL PROTECTION
EXPOSURE LIMITS:
CLEAR SCHOOL GLUE:
No occupational exposure limits established.
VENTILATION: Based on available information, additional ventilation is
not required.
EYE PROTECTION: Eye protection not required under normal conditions.
CLOTHING: Protective clothing is not required.
GLOVES: Protective gloves are not required.
RESPIRATOR: No respirator is required under normal conditions of
use. Under conditions of frequent use or heavy exposure, respiratory protection
may be needed.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: liquid
COLOR: various colors
ODOR: Not available
BOILING POINT: Not available
FREEZING POINT: Not available
VAPOR PRESSURE: Not available
VAPOR DENSITY: Not available
SPECIFIC GRAVITY: Not available
WATER SOLUBILITY: Not available
PH: Not available
VOLATILITY: Not available
ODOR THRESHOLD: Not available
EVAPORATION RATE: Not available
COEFFICIENT OF WATER/OIL DISTRIBUTION: Not available
10. STABILITY AND REACTIVITY
REACTIVITY: Stable at
normal temperatures and pressure.
CONDITIONS TO AVOID: Avoid heat, flames, sparks and other sources of
ignition. Avoid contact with incompatible materials.
INCOMPATIBILITIES: oxidizing materials
HAZARDOUS DECOMPOSITION:
Thermal decomposition products: oxides of carbon
POLYMERIZATION: Will not polymerize.
11. TOXICOLOGICAL INFORMATION
Not available
12. ECOLOGICAL INFORMATION
Not available
13. DISPOSAL CONSIDERATIONS
Dispose in accordance with all applicable regulations.
14. TRANSPORT INFORMATION
U.S. DEPARTMENT OF
TRANSPORTATION: No classification assigned.
CANADIAN TRANSPORTATION OF DANGEROUS GOODS: No classification assigned.
15. REGULATORY INFORMATION
U.S. REGULATIONS:
CERCLA SECTIONS 102a/103 HAZARDOUS SUBSTANCES (40 CFR 302.4): Not
regulated.
SARA TITLE III SECTION 302 EXTREMELY HAZARDOUS SUBSTANCES (40 CFR 355.30):
Not regulated.
SARA TITLE III SECTION 304 EXTREMELY HAZARDOUS SUBSTANCES (40 CFR 355.40):
Not regulated.
SARA TITLE III SARA SECTIONS 311/312 HAZARDOUS CATEGORIES (40 CFR 370.21):
ACUTE: No
CHRONIC: No
FIRE: No
REACTIVE: No
SUDDEN RELEASE: No
SARA TITLE III SECTION 313 (40 CFR 372.65): Not regulated.
OSHA PROCESS SAFETY (29CFR1910.119): Not regulated.
STATE REGULATIONS:
California Proposition 65: Not regulated.
CANADIAN REGULATIONS:
WHMIS CLASSIFICATION: Not determined.
NATIONAL INVENTORY STATUS:
U.S. INVENTORY (TSCA): All the components of this substance are listed
on or are exempt from the inventory.
TSCA 12(b) EXPORT NOTIFICATION: Not listed.
CANADA INVENTORY (DSL/NDSL): Not determined.
16. OTHER INFORMATION
©Copyright 1984-2008 Symyx Technologies, Inc. All rights reserved.
SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE, except that the product shall conform to contracted specifications, and that the product does not infringe any valid United States or Canadian patent. No claim of any kind shall be greater in amount than the purchase price of the quantity of product in respect of which damages are claimed. In no event shall Seller be liable for incidental or consequential damages, whether Buyer's claim is based on contract, breach of warranty, negligence or otherwise.